Planning Your Bathroom Remodel Budget - Home Improvement Ideas

As a bathroom remodeling contractor, I get calls from people, that have no idea what they want or how much anything is going to cost. Here's some simple tips that can be very helpful when planning a bathroom remodel budget.

Bathroom Remodeling Investment

In 2008, the average mid-range bathroom cost around $16,000 and you could recoup around $12,000 of your original investment upon the sale of your home. According to a popular remodeling magazine, larger bathrooms using expensive fixtures, tile, bathtubs, woodworking, toilets and showers had an average of $52,000. Upon the sale of a home, you could recoup around $36,000 of your original investment.

Finding out How Much Things Cost

My first suggestion, would be to visit your local home improvement center, lumber yard or plumbing supply warehouse. Larger stores like Home Depot and Lowe's, seemed to provide you with value pricing but don't have a large selection. While doing some research on the Internet I noticed that some of their pricing is outrageously, outrageous. Some plumbing supply warehouses can provide value but beware others won't.

Create a List of Bathroom Remodeling Parts

You can get a good idea of your bathroom remodel costs for your budget by making a list of bathroom parts with pricing and then adding them up for a grand total. If you're a total bathroom remodel budget is $15,000 and you have a $6,000 bathtub with $4000 worth of tile, you could have a budget problem.

Figuring out the Labor

You will have to contact a contractor to get an actual cost for the labor. Sometimes you can double the cost of your bathroom remodeling parts to get a rough idea. If you have a list or a couple of lists and a few pictures of some sample bathrooms, this will make the contractor's job easier and often they can give you a labor price within a few days.

Give Yourself a Cushion

I would suggest leaving yourself a small financial cushion for any additional remodeling items. For example, you could see a different toilet, or instead of painting the walls, you now choose to wallpaper, you could incur additional expenses that you haven't planned for. If you know exactly what you want and stick to the original bathroom remodeling plan, you shouldn't need the cushion.

Financial problems often transfer into construction problems, so spend some time figuring out, how much money you want to spend on the bathroom remodel and try not to go overboard on the budget. I hate to see homeowners struggling with home improvement loan payments. Try to create a bathroom remodeling budget that is realistic and will not create a financial burden upon you or your family.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

If your looking for some more bathroom remodeling or home building ideas.

Personal Development

Forklift Inspection

Having been in the equipment sales business for nearly 30 years, I get asked a few questions on a consistent basis.

Most frequently I'm asked, "How do I know if I'm getting a quality piece of equipment?

Or "What should I be looking for when I buy that used iron?"

Well of course that depends on what you are looking for. There are different inspections that need to be done for different categories of equipment. And because there are so many types of equipment being manufactured today there isn't enough time to cover every one of them, at least not in one article.

What I will do though is address a different piece every month and hopefully that will answer the majority of your questions as we go through-out the rest of the year.

Of course if you have a specific question you can always call or e-mail me and if I don't know the answer, I can find the answer for you in short order.

This month let's start with Forklifts;

The most common type is the Industrial straight mast forklift. For the sake of space we'll concentrate on a 5,000 lbs capacity machine. But this really could apply to any standard straight mast machine.

Let's go right to the heart of any piece of equipment, the engine.

Check the oil level, and when you have the dip stick out of the engine, run the oil over your fingers, see if you feel any dirt or grit in the oil itself. Check the color. If it has a milky or watery look to it, you may have cooling system problems. How is the thickness of the oil? Is it fresh or has it lost its viscosity? Then finally smell it. Does it smell burnt or just smell like oil? This isn't as through as having an oil sample run, but as a quick inspection, it can tell you if the machine has been serviced lately.

Next let's take a look at the machines physical structure.

Inspect the mast. Look inside the channel where the different stages ride up and down.

Are there any shiny or worn spots? Any metal shavings present? Start the machine up. Does the mast move up and down smoothly or does it bind up? Does it chatter on the way down? Binding could mean a structural problem possibly even a bent mast or carriage assembly. Check out the hoses. Is there any excessive wear, cracked covering or leaks? Then inspect the lift cylinders and tilt cylinders. Look for pitting, scrapes or missing chrome on the rods themselves. This will eventually cause leaks. And of course check for obvious leaks. If the machine is equipped with a side shift operate that and check for all of the above on that cylinder as well.

Check the area where the mast connects to the forklift. Is it free of cracks and look well lubricated. Check out any pins and or bushings. Same thing, free of cracks and well lubricated? Check the carriage out itself. Is it bent? Does it have a back rest? And are the fasteners tight. Inspect the areas where the forks are attached. Does it look in good condition? Finally check the forks themselves. Are they straight? If they have holes cut in them, (for a trailer ball hitch) remember that may have changed the temper of the metal on the forks and cause them to be weaker.

Continue on with the structure inspecting the machines ROPs (roll over protection) to make sure it hasn't had something dropped on it or been flipped over on its side. Any damage here could cause you liability down the road if someone were to be injured due to a damaged ROPs.

Look at the back end of the machine to see if you can check the condition of the steer axle and steer cylinder. Check for leaks and any major play in the steering assembly, ball joints and axles.

Now it's time to operate the lift. Make sure the seat belt is in good condition and USE IT.

Start the machine again and check for the transmission operation. Forward and reverse. The machine should move smoothly without major delays or transmission slippage. Does it have an inching pedal? And does it operate correctly. Check the brakes. Also check the steering. Is it smooth without excessive play? There shouldn't be any offensive noises coming from the machine during these tests.

Operate all functions again on the forks, Lift up down, tilt forward and back and side shift side to side (if equipped). Some hydraulic sounds will be heard but it shouldn't be a growl or a scream.

There is nothing better than checking out a machine first hand to tell you if it's a good unit or if it's one that should be avoided at any price.

Remember:

You always get what you expect, when you take the time to inspect.

If these terms I've used are foreign to you, it might help to have your mechanic go with you to look at the machine. Or as always, you can call me if you need help with a machine.

Todd R. Moir is the owner and principal broker of equipwholesale and has been in the equipment industry since 1975. Working in the equipment rental industry gave Todd a solid background in how to buy and sell construction equipment. Contact him at todd@equipwholesale.com or at http://www.equipwholesale.com

Discussing the Construction Home Building Process

Construction home building is the "meat and potatoes" of erecting a home. There are several different stages that go into making one. Manufactured homes are made a lot quicker than custom homes, but they usually have cheaper materials and labor. The home plans that you choose will determine how long it takes to build your new building.

There are several different stages in constructing it from new home plans. First the ground has to be leveled. If the ground is not level, then the building will settle and the foundation will crack, or the building will sink into the ground. Then the base of the house has to be constructed.

This is usually pier and beam or a slab. Basic plumbing is added at this part of the building as well. Then they add some of the framework for the building. After the framework comes the walls and roof frame. The rest of the plumbing is added, and then the sheet rock and insulation.

They put the roof on, and then add the electrical work. The windows and doors are added, and then they put up the bricks or whatever will be the outside of the house. Once the outside is complete, then they move on to the inside of the house and add whatever is needed indoors. The last thing to be done is floors and painting, and then finally the yard. This process is used because it is the most efficient for following home floor plans.

Manufactured homes are made differently than custom homes. Construction home building for manufactured homes is usually accomplished all at once. If you are interested in buying one, then you look at the home floor plans that the company has available. Then it is possible to choose different features to customize the house. Paint colors and floor coverings are usually chosen at this time too.

The building company then finishes the house so the new owners can move in. There are many manufactured homes built in the ranch house plans style or in the Tudor house plans style. It is easy to build many of these kinds of houses. The home building industry has grown a lot in past years. This started in the 1950s and 1960s with the first manufactured homes. Now, most homes that are built are at least somewhat manufactured.

Construction home building has not changed much over the years. Home floor plans are built into 3-D homes. The main difference in new homes versus old seems to be the fact that manufactured homes are more popular now. While it is still possible to customize these homes, it is harder. However, the fact that the homes are cheaper keeps them popular.

Discover more information about construction home building from Mike Selvon portal, and get more insider small house plans tips

Common Mistakes With Faux Finishes - House Remodeling Ideas

The elements of faux painting aren't difficult but there's always room for error here and there. Keep these important tips in mind and you're half way there.

1. Your end result is only going to be as good as your materials. That applies to paint and brush quality but above all to your surface. Think of it as your canvas. You're about as likely to achieve your aims on a surface coated with flat paint as you would be painting on tissue paper.

Eggshell or satin base paint is the best undercoat. Faux finishes don't work as well on flat paint surfaces. Paint also needs to dry slowly and flat finishes tend to dry quickly and the scope for fixing mistakes is limited. Finally, underlying flat paint just seems to dull finishes.

2. A few cents of commonsense is worth dollars of equipment. Don't bother with unnecessary gimmicks. Spend your money on quality paints and brushes instead. You don't need a special sponge applicator - almost any soft sponge will do. You don't need an artist's palette. Ice cube trays are cheap and actually hold more paint.

Don't waste that paint! You can always stick it in the freezer rather than letting it harden. Another money-saving tip is to use dishwashing liquid for cleaning brushes. You can buy fancy cleaners but a grease-cutting dishwashing liquid works just fine with water-based paints and with stencil creams, which are partially oil-based.

3. If your surface is pitted or cracked, it will need filling, and sanding when dry. A common error is to assume that that once your faux finish is completed your job is done. Wrong! You MUST seal with water-based sealer before painting, or your wall will look blotchy and diseased. Seal with a color that blends in with the rest of the wall or patches will show through. If you don't have that original paint, mix the sealer with suitably colored acrylic paint to minimize the contrast.

4. You know the saying: oil and water don't mix. Remember that when painting or suffer the consequences. The resulting curdled slush is not pretty. In short, know your paints and read your labels. Latex paint may sound like it's oil-based but it's part-water.

5. Not only is it true that mess is stress, but lack of cleanliness will foul up your finish. You need to clean brushes really well if you don't want previously used colors contaminating your handiwork. Running water and finger massage won't clean properly. That doesn't mean you need expensive professional cleaning pads. Check the kids' department: you can find cleaning pads there at a fraction of the price.

You need to maintain a clean working environment, especially when working for others. Small splashes on carpets can be handled without chemicals. Try nail scissors. Wait until the paint is dry. Adding water just spreads it. Then snip the soiled ends, strand by strand. This won't work on larger patches, so make sure you use drop cloths as a preventative measure. For disasters that can't be trimmed out, try product called Goof Off.

6. When using glazes, wet is the watchword! You need to finish in one seamless session. That means no bathroom breaks (so go before you start!) or refreshment interludes. Wet and dry edges won't mix, the dry glaze won't spread and it will show. Work fast, especially in hot dry climates.

7. You may not recognize your painting style, but everyone has their own unique technique. That's why collaborative efforts don't work. People can work together as long as they work on different layers or walls, not different sections of the same layer/wall. Your style can even change during a day: pre- and post-lunch. Plan your sessions and breaks to maximize uniformity in technique.

Ready to start your faux finish painting project? Get the designer walls that would make even "Martha" jealous! Claim your free "Insider's Guide to Faux Painting" and avoid all the common mistakes, get success tips, find the right products for the job and more.

Window Header Framing Problems

As a building contractor it is my job to assemble the house to meet the specifications from the architect and the structural engineer. I do this by looking at the building plans and installing the specified lumber sizes. I can take it upon myself to install a larger size wood beam or window header adding an additional cost to the job of course. I don't think so.

It's not uncommon for a framing contractor that has an additional 5 foot scrap piece of 4 x 8 left over that he now has no use for. He can then choose to use the 4 x 8 instead of a 4 x 6 for the window header. This type of building is common and acceptable.

If the structural engineer calls out for 4 x 6 window and door headers do not take it upon yourself to replace the 4 x 6 with a 4 x 4. I have seen too many framing contractors or carpenters make an on-the-job judgment like this.

A good example would be a single story house with 2 foot wide windows that require a 4 x 6 window header. As the carpenter builds homes over the years he can come to his own conclusion that a 4x4 will work fine for this application. Again keep this in mind as a framing contractor and a carpenter you are assembling the home not designing it.

Do not change the sizes of any headers or beams.

A long time ago carpenters used a standard rule of thumb, you could go up two sizes larger than the window opening for your header. Let me give you an example of what I'm trying to explain.

A 4 foot wide window opening would require a 4 x 6 window header. A 6 foot window opening would require a 4 x 8 window header. This should give you an idea of what I mean by going up two sizes larger than the window opening to figure out the lumber necessary to use for your window header.

This rule of thumb does not necessarily apply in today's building industry. The reason for this is structural changes from earthquake damage. The structural requirements that are required for building a home require a lot more metal bracing and strapping. Therefore some of the lumber requirements for beam sizes and window headers will be different.

This message is for general contractors, framing contractors and carpenters. When installing a window header and you take it upon yourself to change the size you also assume the responsibility if the building fails. This type of mistake is common and you guys know what I'm talking about.

It's not worth it. Keep in mind you are the assembler and not the designer of the building you are working on.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and House Framing Structural Repairs

Questions To Ask Your Pastor

Why Read The Bible?

How easy is it for you to let dust collect on your Bible?

There was a time when I was first searching out the truth about Jesus Christ that I was embarrassed to let friends see the bible I had purchased sitting in my living room.

Then there was a season during which I was so proud to have my study bible laying open with a bookmark, highlighter and note paper nearby.

Then my bible started to just feel like an extension of my own body... always there, always ready.

Then the bible collection began... I wanted different versions, different purposes, different looks and different styles. A bible for my bedroom, a bible for the car and a bible just in case someone needs one.

And sadly... there has been a season in my life where my bible collected dust. How can that be?

Why read the Bible?

A. It shows you the right path.

B. It alerts you when you are getting off the right path.

C. It teaches you how to get back on the right path.

D. It empowers you to stay on the right path.

Isn't that what life is all about? Finding and staying on the right path? And isn't life always trying to get us off of the right path? The Bible is our Path Guide. We dare not let it collect dust - or worse yet, be left behind completely.

Joel Osteen and his father before him begin every service at Lakewood Church by leading the entire congregation in a simple prayer of confession and it starts like this:

"This is my Bible:

I am what it says I am;

I have what it says I have;

I can do what it says I can do."

When you open your Bible to spend some quiet time with your God - Do you believe that you are what the Bible says you are? Do you believe that you have what it says you have? Do you really believe that you can do what it says you can do?

How will you approach your Bible today?

About the Authors: Kelly McCausey and Sandra Jensen lead the Me Skills Discipleship Community, a private membership website for Christians who wish to enjoy a deeper relationship with Christ. Subscribe for free daily email devotionals at http://www.meskills.com

Five Things You Should Know About Religion

Most of us are raised from children into adulthood, to believe in someone else's religion. Most of us never even got the chance to choose a religion or spiritual beliefs to follow on our own. I came up with a simple list of five things that you should know about your religion, or you shouldn't be allowed to practice it.

1. Where did your religion or spiritual beliefs originate from? You should find out who started your religion and why they started it. Some of the worlds major religions were started by intelligent people. Do you think it's possible that your religion was created by an intelligent person, instead of a supreme being or multiple gods. Someone's just trying to trick you into believing.

2. How did you get involved in your religion or spiritual beliefs? Was it part of your upbringing, did your parents suggest this religion to you, how long has your family been involved in your current religious beliefs. Was your great, great, great, great, great grandfather or grandmother part of this religion or spiritual belief. How far back does it go in your family?

3. Do you believe in your religious doctrine or scripture? Is there any parts of your religious scriptures, writings or communication from other fellow believers that doesn't sit right with you? Does every part of your religion makes sense and can it be explained sensibly to someone outside of your religion?

4. Do you practice what you believe on a daily basis? If you're supposed to read your scriptures or pray daily, do you? If your religion teaches love and compassion, how do you treat people less fortunate than yourselves? Are you one of those people who can justify your wrong doings, to yourself and others, to give them the illusion, that you are a religious or spiritual person.

5. Do you know where you are going after you die? Are you going to someplace wonderful and extraordinary, like heaven? If you had to earn enough credits or points, do you think you have acquired enough, to enter the next level of existence? If you're bad, are you going to a bad place, with all the other bad people?

Try to always keep one thing in mind do you use, religion and responsibly.

These are just some of the answers, that I sincerely believe most people should know about their religion or beliefs. You should be able to answer at least one of these questions if asked by a nonbeliever.

Greg Vanden Berge is a published author, internet marketing expert, motivational inspiration to millions of people all over the world and is sharing some of his wisdom with experts in the fields of writing,marketing, and personal development

Greg is currently working on a spiritual religious articles filled with great subjects on a wide array of topics, like religion, self help and spiritual changes in the world. His views on religious freedom are slowly changing the way people think about institutional religion